First you should decree where the electricity for your new lamp will come from. The ideal spot is from a junction box on the ceiling in the town of the pool table, some houses have an outlet on the wall or ceiling, or possibly the junction box isn't in the town of the table, but we'll assume you're set up for the town table install.
Table Lamp
The height of the billiard lamp should be practically 30" from the covering of your billiard table. It should allow the light to cast out to the edge of the pool table, but not be so high the light floods out on the floor. Also, if your billiard table light is too low you will have shadows from the balls at the ends of the table. I recommend beginning at 30" and adjusting it according to the specifics of the billiard light you choose, naturally add or subtract links from the chain.
If your table isn't installed yet and you'd like to hang your light first, hang the bottom of your lamp shades about 62" from the floor. You may wish to adjust it slightly after your billiard table is in, so be sure to leave some extra chain available. Most pool table lights sold today, and all those sold at My institution Gameroom, will come with a canopy that attaches to the ceiling which you will hook the top of the chain to. If you don't have power in the town of the table you may leave the canopy off and naturally run the chains to two cut off hooks above whether end of your pool table.
I hope this gives you a guide when hanging your new pool table light, But if you have any other question, please feel free to email me anytime, Rich
How to Hang Your Pool Table Light
No URL
No comments:
Post a Comment